Dehumidifier used in carton warehouse is a good choice

Dehumidifier used in carton warehouse is a good choice

Many people know that cartons have a strong hygroscopic, especially in the rainy season, the air moisture is very easy to cause the carton affected by moisture, if once damp, there will be mildew, soft and other phenomena, will seriously affect the carton packaging quality. Especially for those businesses, the management of cartons has become an important task for each enterprise, because cartons can not only protect products, but also increase the first impression of customers. Therefore, it is better to equip a dehumidifier in the carton warehouse, so as to reduce unnecessary losses.

Use materials (such as wood or plastic boards) that do not transfer heat and moisture easily and should be stacked more than 15cm above the ground. Measurement of warehouse temperature and humidity: Air temperature and humidity are usually measured using a dry and wet bulb thermometer. In order to avoid sunlight, rain and dust intrusion, dry and wet balls should be placed in the shutter box. The height of the ball in the shutter box is 2 meters from the ground. The door of the shutter should be placed in the north to prevent direct sunlight during observation. Boxes should be kept clean and free of debris to prevent air circulation. In the library, the dry and wet table should be placed in a well-ventilated place, not exposed to the sun. Do not hang it on the wall. It is about 1.5 meters above the ground.

If it is a medical carton, the requirements are more stringent, usually need a special warehouse storage, can control the temperature and humidity, in addition to the need to be equipped with pest control lights and other insecticidal equipment, to avoid contamination of the carton. Each carton should be spaced apart to ensure good ventilation. The storage period of corrugated board and carton shall not exceed half a year. Packing box burst line is due to the cardboard moisture content is insufficient, the general moisture content between 8-12% is the moisture content of normal production, lower than this value, will produce burst line, warping phenomenon. The temperature is usually controlled by a natural or central ventilation system, and seasonal humidity varies due to regional variations